Clean four draft lines at once with this efficient keg line cleaning kit. Designed for use with Nukatap and Intertap faucets, this system ensures a thorough clean by circulating cleaning solution through your entire draft setup. If you need a kit for different faucet types, contact us for compatibility options.

How to Use:

1. Fill a bucket with your preferred keg line cleaner.
2. Place the pump in the bucket and connect it to the ball lock disconnect on Tap 1.
3. Use a jumper line to connect Faucet 1 to Faucet 2.
4. Attach the stainless ball lock jumper between the ball lock disconnects on Tap 2 and Tap 3.
5. Use the second jumper line to connect Faucet 3 to Faucet 4.
6. Insert the orange ball lock cap into the ball lock disconnect on Tap 4, then place it in the bucket with the pump.
7. Open all faucets and plug in the pump.
8. Cleaning solution will flow from Faucet 1 through all lines, exiting from the ball lock disconnect on Faucet 4 and returning to the bucket.
9. Allow the solution to circulate for at least 30 minutes, then flush with clean water for 5 minutes to remove any residue.

Regular line cleaning prevents off-flavors and ensures your draft beer system stays in top condition. Ideal for homebrewers and kegerator owners looking to maintain fresh, great-tasting beer.